DIY Home Improvement Forum banner

broken irrigation PVC

1737 Views 2 Replies 2 Participants Last post by  bjr23
I snapped off a 1-1/4 PVC pipe in a manifold of Tees that would have to replace all the Tee's as they were all glue tightly together. I need the boring tool to bore out the broken piece of pipe to repair. Where can I get this tool. I seen the plumber guy on the DIY TV use it and that's what I need. It was turn with a drill motor. The local Lowes didn't have a clue as to what I was talking about. bjr
1 - 3 of 3 Posts
Here's what you need....
Broken PVC Irrigation pipe update

No reponses on this message board. I finally found something called a Rambit at a local plumbing supply store. It took some investigation and asking a lot of people who gave a lot of shoulder shrugging. I appearantly am the only person to experience a snapped off 1-1/4 PVC pipe. I have since purchased the tool made repairs. bjr23
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.