[kjmass1]

I have some odd sized basement Windows I need to replace. I was wondering if I could just keep the existing wood frame, add stops and get a vinyl replacement.

Or should I rip out the old wood and re-frame with PT?

Windows are decent sized- 33x21 with existing frame so need to custom order.

 

[Windows on Wash]

Depending on the condition of the wood, either will work.

Seeing as the cost of the unit is roughly the same from most of the contractors yards, I would go with the right size for this application.

 

[kjmass1]

Would these have been cemented in place? Or is it as easy as replacing the wood? I've seen on some metal frames that it's a real pain to chisel out the cement to make it flat.

 

[Windows on Wash]

Should be able to get it out with a chisel and hammer. Not sure what the wall construction is but given the parge type coating, its probably block construction.

 

[kjmass1]

Here is an exterior. 1940's construction. Wood actually doesn't look too bad just old paint peeling.

The faucet pipe is one reason I don't want to deal with taking it all out.