DIY Home Improvement Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey guys, so I'm not a professional but I have a question. Moving into a new construction Apartment with a balcony that is about 6' wide and 15' long its built with 2x10 joists 16in on center. What is the maximum load per square foot? In Salt Lake City code is 40lb. Can I put a hottub that is 29sq ft weighing 2,000lb (hot tub, water, people). Thanks!
[/LIST]
 

· retired framer
Joined
·
72,546 Posts
Hey guys, so I'm not a professional but I have a question. Moving into a new construction Apartment with a balcony that is about 6' wide and 15' long its built with 2x10 joists 16in on center. What is the maximum load per square foot? In Salt Lake City code is 40lb. Can I put a hottub that is 29sq ft weighing 2,000lb (hot tub, water, people). Thanks!
[/LIST]
Decks built to take a hot tub cost more and then advertised as such.
Up here that would require more than code so the city would have an engineers report on how it was built.
 

· retired framer
Joined
·
72,546 Posts
To clarify this is not a full size hot tub that fits 6-8 people. This is a 150 gallon hot tub that seats 2. Thanks
Either way, it takes the opinion of an engineer. The one that designed it or the one you pay to certify it. That is the only way you protect yourself from liability.
 

· Registered
Joined
·
14,965 Posts
You need three approvals. Send each a copy of the specifications for the hot tub, ie foot print and maximum weight with people and water in it.
1. Your landlord
2. The local authorities, city, town, whoever approved the construction.
3. And your insurance company. Don't assume they will be happy if the other two agree.

Bud
 
  • Like
Reactions: Nealtw
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top