DIY Home Improvement Forum banner
1 - 2 of 2 Posts

· Registered
5 Posts
Discussion Starter · #1 ·
I have a Snapper Lawnmower with 6.75 B&S engine. It started this summer and after 4 passes through the lawn it died. I could not get it restarted. I pulled the plug and checked to see if I was getting spark, and yes it is. I had good new gas in the tank. I removed the filter and squirted gas in the carb. I can't get it to start. I thought it might be valves so I did a valve job and checked the cylinder and didn't feel any scratches. I pulled the flywheel and the key was good. What the heck am I missing?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.