DIY Home Improvement Forum banner
1 - 1 of 1 Posts

14,111 Posts
Purchase a 3/4" dia. bottle brush, cut the wire loop off of the handle then chuck the handle in your portable drill. While out purchasing stop by the automotive store and buy some aluminum polish for the rotating brush to work with.

An older method and not very techie is a shop made flap wheel. Cut a slot in a 3/8" wood dowel and insert a piece of sandpaper or emery tape and rotate that in the 5/8" opening with your drill motor.

Consider lubricating with a very thin application of silicone grease.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.