DIY Home Improvement Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,034 Posts
It seems either one will work. The black pipe may require some careful measurement to get it to line up.


If you're feeding the copper through a hole in some other metal, you should be careful to make sure the copper doesn't end up against the side of the hole. Harder metals may wear a hole in the copper. If that could happen, you may need to provide a 'cushion' around the perimeter of the hole.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top