4 way switch with one fixture in hallway

1349 Views 3 Replies 4 Participants Last post by AllanJ, May 1, 2009

rstompkins

Discussion Starter · May 1, 2009

We changed out the 3 switches in our hallway with a 4way in the middle and 3ways on the ends and it was working. Now we are trying to replace the fixture (wiring the same way as the old one) and it's not working. I have a diagram for the 4way setup, but we don't have enough wires to set it up that way. Help!

Save

1 - 1 of 4 Posts

PaliBob

· #3 · May 1, 2009

rstompkins said:
We changed out the 3 switches in our hallway with a 4way in the middle and 3ways on the ends and it was working.

So far so good

rstompkins said:
Now we are trying to replace the fixture (wiring the same way as the old one) and it's not working......Help!

Replacing the fixture is the easiest part. You went astray in part one, It was not working as it should. Here is a short tutorial:
http://www.wfu.edu/~matthews/courses/p230/switches/SwitchesTut.html

Save

1 - 1 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month