DIY Home Improvement Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
630 Posts
Ok first pitcher find you red and black sould be in 3 wire (same cable) they need to be on the two gold screws on switch.Next the other two black wires twist together and get a short piece of black wire and twist together with the two wires you twisted together that gives you a (pigtail one wire to goto common black screw on switch) Hope that helps
 

·
Registered
Joined
·
630 Posts
In 2nd box do the same thing find your 3-wire (your black and red in same wire)They go on gold screws.The other wire (black should goto light tie that one to the comon-Black screw)
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top