DIY Home Improvement Forum banner
1 - 2 of 2 Posts

·
Administrator
Joined
·
42,361 Posts
Set it 1° undr room temp. So it starts in first stage.

Wait till its running for about 10 minutes.
Then set stat down another 6 degrees or so.
You should hear the stat click, and the air flow from the registers should increase.
 

·
Administrator
Joined
·
42,361 Posts
May not be wired correctly.

Call the contractor back.

Hard to say where its miswired at.
 
1 - 2 of 2 Posts
Top