DIY Home Improvement Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,377 Posts
Discussion Starter · #1 ·
Hello, I'm a little confused by this pic. Would I need a 12/2 or 12/3 from light/fan to this switch? But 12/3 will have a black and red the pic shows a red and yellow wire. I have no pwer coming into light, it comes into switch.Thanks.
 

Attachments

·
Registered
Joined
·
2,377 Posts
Discussion Starter · #3 ·
12/3....or 14/3 if breaker is 15A.
These will be the wires marked fan and light and the unmarked
neutral shown inside the box.
I'd connect red from cable to red from device and
black from cable to yellow from device.
Thank you. So since the 12/3 is black and red and the switch is red and yellow I can attach the black to the yellow?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top