1/2" Copper Gas Pipe with 5/8" OD

1671 Views 2 Replies 3 Participants Last post by joecaption, Jan 26, 2013

bergsj

Discussion Starter · Jan 26, 2013

Hi All,

I made a rookie mistake and ran a 1/2" copper gas line (inner diameter) that has a 5/8" outer diameter.

I plan on flaring my pipe and using a flare nut, however the pipe won't fit through my 1/2" flare nut.

If I use a 5/8" flare nut, will the threads also be 5/8" ? I need to connect the pipe to an existing 1/2" OD shut off valve.

Is there such thing as a 5/8" flare nut that has 1/2" threads?

Save

1 - 1 of 3 Posts

Bondo

· #2 · Jan 26, 2013

Is there such thing as a 5/8" flare nut that has 1/2" threads?

Nope,... Dependin' on how ya look at it, ya ran the wrong size line, or ya just gotta Adapt what you've got, to what ya need....

Btw,... Most flarin' tools, Don't do 5/8" copper tubin'....

Save

1 - 1 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month