DIY Home Improvement Forum banner
wrought iron
1-5 of 5 Results
  1. Painting
    My iron fabricator contractor brush painted my brand new wrought iron railing with acrylic paint instead of the paint he should have used. what do i do now? He is willing to come back and paint on top of the acrylic paint using a rustoleum based paint. The problem is he did not cover the porch...
  2. Painting
    Hi, I painted over my indoor railing without priming it first. After it dried it remained sticky- Paint store employee told me to strip it- As I began scraping I noticed there were about 4 layers of paint on it. I used citristrip to remove the layers. Heres the problem- I was able to scrape...
  3. Windows and Doors
    I recently began the finishing touches on the house ive been building and found the perfect door i wanted, as im doing all the work myself i was wondering if anyone had any tips on installing wrought iron doors (i got the door from this website Adoore.com and heres a picture of it. id...
  4. Remodeling
    I'm remodelling my living room and I have an old wrought iron hand railing.... i removed the carpet and the iron spindles are right into the wood floor... I removed the screws from the walls (at each end) and I can't remove the spindles from the floor? How would they fasten these to the foor...
  5. General DIY Discussions
    Any idea what it would cost to remove an iron staircase railing and newel posts and replace with them with wood? The problem is that the railing in the hallway over the stairs is only about 32 tall inches and feels unsafe (code is 36 inches now). My wife also doesn't like the look of the...
1-5 of 5 Results
Top