DIY Home Improvement Forum banner
waste
1-4 of 4 Results
  1. Remodeling
    Hi everybody, I'm thinking about installing a recessed toilet. Something like Toto Aquia: I'm just not sure regarding rerouting the waist pipe. How complex would it be? I'd appreciate some hints on this. Thanks, Ruben
  2. Roofing/Siding
    Looking to replaces a shingle roof on a home and taking multiple bid. The roof is 3,126 sq. ft with eight hips, four ridges, 4 valleys, one chimney, a dozen box vents and a moderate slope, mainly 7/12. Planning to use a laminate shingle that needs three bundles per square. Several bids came in...
  3. Plumbing
    1) The plumbing codes state that when it is necessary to increase the size of a vent extension through the roof that the change in diameter must be made at least 12 inches inside the building below the roof. What is the purpose of this rule? Why can't the change be made at 3" inside the...
  4. Roofing/Siding
    I am used to 10% waste on gable roofs and 15+% on hip roofs, but what I am looking to figure out is a real life formula. Is it possible to take all of our data collected, such as perimeter, ridge, valley, and concise measurements, to come up with an exact waste factor on paper. It may not always...
1-4 of 4 Results
Top