DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Painting
    I wanted to strip my metal front door and repaint it. I applied stripper and started scraping the paint off. There is a factory coating on the door that looks like wood, and after removing some paint I saw the coating was badly sun damaged and cracked (the previous owner of the house had painted...
  2. Painting
    I am stripping latex paint off the floor and oil based off the rails with a grinder and there is significant paint left in the little wood cracks, pretty deep and visible. No way I can or should sand that deep. I am not super experienced with this, but am thinking there is no way to get this...
  3. Painting
    Hello, I have some heavy duty wrought iron furniture from back in the 60's that I would like to restore myself. I was wondering if anyone might have advice on how to tackle this project. Thanks!!!
  4. Painting
    I am prepping to paint my house. The previous paint job wasn't that long ago, but the work was kind of sloppy. There are several localized areas where the paint is chipping or bubbling. Obviously I will need to strip, sand, and prime these areas. However, there are also lots of areas that look...
  5. Painting
    Is there a way to strip paint off plastic items that have intricate detail in them? If I use sandpaper I will damage all the detailing and I don't want to do that. Any ideas?
1-5 of 5 Results