DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Electrical
    I'm new to this forum, I live in Saudi Arabia. I just installed a smart light switch that requires a neutral line, this is the diagram for the connections for the smart switch : when I opened the switch light outlet I found a black wire capped inside and not used, I used a voltage detector...
  2. Electrical
    I've bought a house with a number of z-wave smart switches. I have a 3 gang box that had 2 smart switches (#1 & #2 on diagram) and one mechanical switch (#3) with no neutral wire. Smart switch #1 died, so I replaced it. So far, no problem. I thought I'd add a third smart switch to replace the...
  3. Electrical
    Going to install a Gosund smart 3-way switch (requires neutral) for the top of the basement. When I took the cover plate off and pulled the old switch out I noticed there was 2 separate 14/2 cables in the box. The one 14/2, the black is hot and the white is just loose in the box. No copper is...
  4. Electrical
    Hi, My apologies in advance for what may be a basic question... In the photo below, I'm trying to install a smart light switch that requires a neutral wire. Those wires that I'm connecting the switch's neutral wire (white) to are colored brown rather than white. (Same color as the load wire...
  5. Electrical
    Hi Everyone! My kitchen has 6 LED pucks in the ceiling for lighting that are controlled via a 3-way switch set-up (1 switch at each end of the kitchen). I'm trying to replace the 2 switches with the TP-Link HS210 smart switch kit (a smart switch kit for 3-way switch situations). I'm having a...
  6. Electrical
    There are two switches that are side by side. The one I'm replacing with a Smart switch does not have a neutral. The adjacent 3-way switch circuit has a neutral. Can I share the neutral from the 3-way switch circuit for my Smart Switch? Both circuits are on the same breaker.
1-6 of 6 Results
Top