DIY Home Improvement Forum banner
schluter kerdi
1-5 of 5 Results
  1. Kitchen & Bath Remodeling
    I’m installing the schluter shower kit in my master bathroom, but am confused about the shower curb install and waterproofing steps. I will be installing cement board below my bathroom (not shower) floor. Do most people waterproof the outside face corners of the curb and the outside face of the...
  2. Building & Construction
    I purchased a Redi shower pan and my plumber set it on the floor. It was a 30" X 60" as I originally thought that was the only size that would fit. My husband is adamant that it is too narrow as the edging curb is almost 5" wide. The actual shower floor is only about 24 inches wide. I want to...
  3. Tiling, ceramics, marble
    Good afternoon, Does anyone have expertise in building a Kerdi-Board curb? I have 1/2" pieces of Kerdi-board that I'd like to use to make my shower curb. The width of the finished curb needs to be 3 7/16". I was planning on cutting the Kerdi-Board 2 11/16" wide, bonding it together with...
  4. Tiling, ceramics, marble
    I'm currently redoing my master bathroom. I purchased a Schluter shower kit to use for the shower pan. Per directions, I used an unmodified thinset to adhere their waterproof membrane to the backer board walls. I was not comfortable with how I adhered them, so after a few weeks, I pulled the...
  5. Building & Construction
    I am a DIY and I am redoing my bathroom and putting in tile. I know Kerdi is the best but I dont have the money for it. I was doing some research and I found this tru-gard vapor shield which is much more affordable to Kerdi's waterproofing stuff. The website says its made from the same bonded...
1-5 of 5 Results
Top