DIY Home Improvement Forum banner
rigid
1-5 of 5 Results
  1. Electrical
    Hi all, I am running some conduit for external backyard lighting. I will be running 1/2" EMT and need a T condulet - I am only able to find rigid T condulets - everything else will be coupled with set screw EMT connectors. Am I better off finding an EMT condulet, or just go with a rigid one and...
  2. Insulation
    1. I have an old farmhouse - just gable vents. I'm about to add more blown in cellulose to part of the attic - do I still need to use ventilation baffles in the soffit area even though there is not soffit ventilation? I have heard conflicting opinions on this. 2. Half of the attic has plywood...
  3. HVAC
    Hello, I'm planning to buy a wood burning fireplace insert and I've visited several vendors in my area. The topic of chimney liner type was raised by one of the salesman I talked to. He was adamant that his company only installed flexible liners as a last resort (i.e. if the chimney design...
  4. Flooring
    My wife and I would like to tile our kitchen but I'm looking for some advice. We would like it if we could just prep the linoleum and tile over it but we don't want a large transition from the hall floor into the kitchen. Currently there is a 1/4" rise from the kitchen onto the hardwood in...
  5. Building & Construction
    I'm in Montana and currently remodeling kitchen, dining, living room. We are going to be down to the studs (pulled off 70's era glued paneling, sheet rock pretty torn up). The original batt insulation was not well installed so we are going to pull the batts back, hand foam the joints where the...
1-5 of 5 Results
Top