DIY Home Improvement Forum banner
please help
1-7 of 7 Results
  1. Landscaping & Lawn Care
    So my house is about a 100 years old with a basement, and on a hill. The front of the house faces the sidewalk about 10 feet out from the front door. The property slopes down towards the back on both the sides and rear of the house. The problem is the front, the sidewalk is higher than the...
  2. Kitchen & Bath Remodeling
    Hi everyone! So i think my contractor didn't quite waterproof my new shower (enough) and my tile expert that was going to help me is "sick". I have to complete the whole thing by Monday, and now I'm confused about this process. I have Durock backer board, and have started to tape and...
  3. HVAC
    Having trouble with the pressure switch .. Ill give a brief history on this unit which may help in diagnosing this problem . Unit installed by professionals in 1996. Only had one repair also by installers ..a new blower motor in 2007. At that time the tech showed me how to do a little...
  4. Painting
    I am looking to paint my powder room that has cherry hardwood floors (brown with red tone). The room has no windows. Baseboard color is white and sink/tank/bowl are light cream. I have read about going bold in selecting colors for the powder room instead of selecting a neutral color (as...
  5. HVAC
    My furnace won't fire, and I can't figure out why. The exhaust blower starts, and that's all I get. It has a new board, new blower motor, and the lines going to and from the exhaust are all clean. It still has gas supply, but never ignites. It doesn't have a pilot light that burns...
  6. General DIY Discussions
    Hey I need to make a frame with 2 ,30 inch wooden doors that open like elevator doors. It will be used a lot during the production. I bought a sliding door track to use. I would like to be able to pull one door and the other door open equally using a pulley system. Any ideas. Please Help!
  7. Building & Construction
    I just had a fence company install a 6' wood privacy fence, and they did something I can't recall ever seeing before. Where there were gaps between the posts and the runner boards, they stacked 2x4's against the posts to fill the difference. Is this acceptable? I paid enough that this job...
1-7 of 7 Results
Top