DIY Home Improvement Forum banner
mixing valve
1-5 of 5 Results
  1. Plumbing
    We have a 3-year old house, and the tub in the master bath has never been as warm as every other fixture in the master or other bathrooms (100F vs. 120F). Now that we have some brief slices of free time as the kids get older, I wanted to fix this. After doing some research, I looked for a...
  2. Plumbing
    OK, i messed up my rough-in a little bit because i did it before buying my bath tub. i thought the center of the inside of the tub was the same as the center of the whole thing on the outside but the outer wall is much fatter so the drain hole is skewed inside... live and learn. as a result...
  3. Plumbing
    I have been having a water temperature problem. It affects the entire branch circuit supplying a 1st floor powder room and upstairs bath. The bath has a Kohl_r single handle mixing valve with a separate selector for side spray/shower/both. Both sinks cold supply [up and downstairs] run hot...
  4. Plumbing
    My husband is trying to shut off the water to install our washer. But he can't seem to find where it can be. I hope this question isn't too broad. Anyway, we live in a house that is separated into apartments. Where in the basement would this water valve be?
  5. HVAC
    Hi, all. First post. :) I'm in the process of removing my existing ceramic floor to replace the current baseboard heat with a hydronic radiant floor system. I've got a couple of questions. 1. Currently, there is tile installed on plywood over an old t-and-g subfloor. What's the best...
1-5 of 5 Results
Top