DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. HVAC
    I have a new Senville 110v, 12,000 btu unit. Finished install and hookups. It blows the 20A circuit breaker whenever compressor tries to kick on. It will run the blower fan if I disconnect the compressor lines. Inside unit seems fine. I checked continuity on the three compressor lines, A,B,C...
  2. HVAC
    Newbie on this forum, here... I've been working on my first mini-split installation - Mitsubishi 18K BTU. I've been taking my time and it's been going well. I'm getting ready to install a factory made line-set between the indoor and outdoor units. The instructions talk about flaring tubing...
  3. Electrical
    Hello all, I am definitely not strong in electrical work and I am trying to figure out what wiring/fuse/disconnects I need for this installation. I will be installing a 12000 BTU Senville unit and this is the information listed in the specs: Power Supply 110V Minimum Curcuit Ampacity 15A Max...
  4. HVAC
    I’d like to use ducted mini-split HVACs for a new home and i have some questions. - Do ducted systems come in a wall unit or only ceiling units? - I have about 12" of space between the ceiling and the roof. Is this enough space for a ducted ceiling unit? What would be the minimum space...
  5. HVAC
    Hello, I am looking for advice on what to do about a 10 year old Fujitsu Halcyon ASU24RL that apparently has a coolant leak. First some background info. I use the unit to cool a 400 ft2 one-story home office located in San Diego. When I first installed the unit, I had multiple computer...
  6. Home Automation
    We are having a Mitsubishi MUZ-FH12NA mini-split installed. I would like to control it with a 3rd party WiFi/Internet connected thermostat; preferably but not absolutely necessary a Honeywell. (The Mitsubishi Internet connected thermostat system is rather expensive and is not the most...
  7. HVAC
    I'm a homeowner... looking for some information and opinion. In December I had a Mitsubishi Mini-split system installed by N.E.T.R. Inc. in my home in Massachusetts. The system consists of seven indoor units and two condensors. Not a small system. I am quite happy with the units.... but...
  8. HVAC
    I have a Zooling mini-split unit installed in my apartment, but do not have the proper remote to operate it. Does anyone have any information about this brand? I haven't been able to turn up much info. Also, does anyone know if a universal remote will work with this particular unit (and if so...
  9. HVAC
    Anyone know of any quad zones mini-split systems that qualify for the federal tax credit?
  10. HVAC
    Ok, HVAC guys. What do you think would be the cost for a quad zone final hookup and test? Do you think a local guy would do it for a few hundred bucks? It seems like the units I have been looking at are precharged, so I'm guessing they would just have to make the lineset connections, vacuum...
  11. HVAC
    Has anyone had or installed a three or four zone mini-split/ductless heat pump system? I'm looking into some HVAC options for my house and I'm trying to weigh the pros/cons of installing one of these systems. I would probably do all of the install work and get a HVAC tech to make the line...
1-11 of 11 Results
Top