DIY Home Improvement Forum banner

lighting circuit

  1. Lighting Suggestions Needed

    Electrical
    I have very limited experience in Resy electrical and I am trying to layout my lighting for a kitchen i am building for myself. I have the most recently decided upon lighting and cabinet layout at the link below: https://www.diychatroom.com/f14/kitchen-cabinet-layout-help-needed-663443/...
  2. Bathroom Lighting Wiring Diagram

    Electrical
    Hello all, I am in the process of re-wiring the electrical for my bathroom renovation. I have attached a wiring diagram of how I believe I should be doing it but I wanted to post it and have someone double check me. This is a re-wire so there are a couple of things already in place: The 14-3 is...
  3. How to split a lighting circuit from 20A feed

    Electrical
    We have an RV sub panel at the rear of our house to connect our RV. The sub panel contains 50A/30A/20 Amp breakers. The breaker on the master panel feeding the sub panel is 60A. The 20A breaker in the RV sub panel has 3 things connected: (1) a small gate operator via conduit, (2) a small...
  4. replaced ceiling fixture not working.

    Electrical
    I took down track lighting and replaced with fixture with 3 lights hanging down pendant. now new light is not working. The switch is a sliding dimmer switch it is connected to another sliding dimmer switch for another light in my kitchen. meaning both dimmer switches are connected to each other...
  5. Changing light switch

    Electrical
    I know this would seem easy but my house is no ordinary house. First off, the reason for switching out the light switch to begin with is because it got so hot that it stopped working (the screws were glowing red). I took out our dimmer switch and found 4 sets of wires going into the box...How do...
  6. Replacement light fixture

    Electrical
    I have ZERO experience with electricity and also just bought a new house and have ZERO money for a professional. I replaced a simple pull chain, medium base, porcelain lampholder and it will not work. The original fixture was coming apart and the pull chain had fallen out. I got a $5 replacement...
  7. 3way lighting

    Electrical
    I have 2 3way switches with a light in the middle. Switch #1 has feed. Is it possible to add a receptacle after switch #2? Is there a constant hot in that box to tap off of?
  8. 20 amp lighting circuit

    Electrical
    Hi, Does anyone know if a 20 amp residential lighting circuit is contrary to the NEC? I was talking to a friend of mine in Canada who is an electrician and he tells me this is not allowed according to Canadian standards. Thanks, Thomas
Top