Search Results for ‘leveling floor’

Hello Everyone, I am laying down from LVP (lifeproof from home depot). Anyway, this is my first time doing it and ive watched about an hour of videos on you tube etc... Question for this group here, is my house is currently half tile and half carpet. My plan is rip out the carpet, and lay...

Hi All! Newbie here! I am looking to level a concrete slab that has settled in my 42 year old home. I have already contracted a foam-jacking company which has filled the entire underlying void with high-density poly foam to stabilize and prevent any further settling. The slab currently has a 1...

I am remodeling my kitchen. I pulled up the tile, which was down, when I bought the house. The person who installed it, placed the tile directly on the plywood subfloor. I am going to be putting down backer board, so I can put vinyl down. Do I need to use a SLC to level the floor before I put...

I am installing Coretec luxury vinyl planks 5"W X 48"L. I have two rectangular areas of my floor that are each about 8' long X 24" wide. Both areas run along walls. These areas are flat with the rest of the floor 24" out from the wall but then dip to 1/2" lower at the edge of the wall. One...

I am redoing my fathers 1962 home and am tiling the kitchen floor. Prior to this, Vinyl tile was used in the kitchen. Due to prior water damage and the fact that the vinyl tiles were not going to come off the subfloor, I removed it (3/4" plywood). The floor is now down to the original plywood...

When we bought our house the kitchen had a low-grade floating floor...so low grade that it was starting to shift and show gaps within our first year of living here. We decided to replace the floor but when we pulled up the floating floor the linoleum that is underneath is extremely...

Hi, I just got a quote from a contractor to level out my floor. His method of leveling out the floor is.. 1. Install 1/4 underlayment to shim and level out floor. 2. Install cement board to provide a level surface. He's charging $465 for this. Does this sound like a good way to do this and a...