DIY Home Improvement Forum banner
inducer won't run
1-6 of 6 Results
  1. HVAC
    I have a 2 York Diamond 95 updraft furnaces in the basement and one of them has stopped working. I am trying to troubleshoot the problem: 1. The White Rodgers 50A51-242 controller LED flashes once when powered as it should. After that the LED does not indicate. 2. When the thermostat calls for...
  2. HVAC
    I have a Olsen Duomatic gas furnace with a Honeywell igniter board and Honeywell gas valve set up to be a downflow furnace. The old inducer motor died so bought new one with exact same specs. Also replaced the Inducer Relay; ignitor board, spark ignitor. Now when power is turned ON the inducer...
  3. HVAC
    He guys/gals, My heater stopped working a week ago. Its a 2008 honeywell system. AC works fine. Main blower come on with heat request. heat sequence never starts. Pressure switch is fine. But the inducer never starts. I powered the inducer straight to a 120v plug and it runs fine, no bearing...
  4. HVAC
    I have a 6-7 year old Fedders gas furnace / AC model ABA 060 NH3R. Yesterday, what I suspect is the fan/blower stopped working. Trying to troubleshot the exact problem I found that the breaker to the unit had been tripped. When I switched the breaker back on it trip again intermittently, some...
  5. HVAC
    HI, I have a Day & Night 350MAV048100ACKA furnace that is on the blink. It does nothing when I run through the test cycle and then flashes an 11. The inducer motor has been making funny noises for the last week or so every time it started up. When I start the test cycle, the inducer motor hums...
  6. HVAC
    I have a Heil inducer motor (Fasco) that begins to start then stops. It as if the start windings are fried. The original fans motor was not running, but hot; therefore I assumed it was seized. It was replaced with a new unit (expensive) with a fairly new run capacitor that I have been told...
1-6 of 6 Results
Top