DIY Home Improvement Forum banner
heil
1-15 of 15 Results
  1. HVAC
    I broke the drain spud on my HEIL manual power humidifier, so I decided to replace the whole thing with a new Aprilaire 700M (which looks to be the exact same unit). However when the Lennox iComfort tstat calls for humidity, the new Aprilaire is unresponsive. No solenoid or fan movement. I'm a...
  2. HVAC
    We just got our new home and it has a Heil furnace. The model is #N8MSN0701412A2 and we are unable to locate the Air Filter. It seems like it was installed upside down and there is no filter location on either side of the furnace itself. I am attaching pictures in the hopes that someone may be...
  3. HVAC
    Hoping this forum can once again save my bacon. Jagans, Marty S., are you out there? I have a 10 year old 90+ Heil furnace in my attic that died last night. I'll try to give as much information as possible so apologies in advance for the long post. The furnace itself is of the N9Mp1 variety...
  4. HVAC
    Hi, i have a ICP Electric Furnace Model: MF20N2600A1 along with a HEIL Heat Pump Model: CH5548VKD1, YJ048GB1. This was already installed in a house i recently bought and at first, i replaced the 1085928 fan control board because it had a burned and cracked chip on it and it smelled roasted so i...
  5. HVAC
    Hi there, my home has 3 Heil NTG3 / FBF 80% Eff units - two have never had issues, but one I am ready to take a hammer to.. LOL Here is the scenario - 1> thermostat calls for heat, and unit does not come on , so I open the blower door, activate the interlock 4-5 times and unit comes...
  6. HVAC
    Hi there, my home has 3 Heil NTG3 / FBF 80% Eff units - two have never had issues, but one I am ready to take a hammer to.. LOL Here is the scenario - 1> thermostat calls for heat, and unit does not come on , so I open the blower door, activate the interlock 4-5 times and unit comes...
  7. HVAC
    Hello - I have a 100 mbtuh 90+% efficiency propane furnace manufactured by Heil, complete model number - N9MPD100J20A2. It is direct-vented outside via a concentric vent. Manufactured late 2007. Ever since I moved in in 2009, I have been battling the same problem – the furnace would...
  8. HVAC
    I've got a 15 yr old heil furnace with issues. The fan kicks on, the glow igniter turns on, the pilot lights, but the main burner will not kick on. The gas valve is a year old and the igniter kit is 5 minutes old. I replaced it because it made since that that might be the problem.(but its not)...
  9. HVAC
    I currently have an old Lennox Elite A/C system that needs to be replaced and is 17 years old! I've have received quotes on both Rheem and Trane. I Think they are both good units based on the information I found on here! I also got a third quote from another contractor who offers Heil and...
  10. HVAC
    I have read about thrity posts on this ofrum about items that sound similar to my problem. Here are my details: I don't know the model number. I can't find one anywhere ont eh furnace. It is in my attic. The AC unit is outside. I found numbers on two parts on the system. The unit seems to have...
  11. HVAC
    Hi I have probably the original gas furnace in my house (c1969). It is a "Heil" brand. I replaced the thermostat a couple years ago and have not had a problem with that. This year when i lit the pilot light we noticed that it seemed like the fan kept running. When I went down to check it, the...
  12. HVAC
    Good morning, Long time reader, first time poster here. First want to thank you for all of the great advise we've found here in the past! Currently we are having a bit of a conundrum with a Heil N8MPN propane furnace. When the heat is turned on the inducer motor starts and after a 15 second...
  13. HVAC
    I have a 1997 Heil Furnace. It will work fine for days even weeks and then randomly will not relight but the blower stays on until I shut off at the thermostat. I leave it off for about 10 minutes then turn it back to heat and it all works fine. Like I said it might work fine for a couple days...
  14. HVAC
    When i turn on my heat it only blows hot air for a short time then is blows room temp, Also the fan doesn't turn off. If i go outside and reset the breaker for the heat it will start working again for a bit then start blowing cool air again. What could be wrong?... I have a Heil 5000, Model...
  15. HVAC
    My Heil is cycling off and on, and takes four trys to come on, but it cools. I'm told a need a new IC board, because the induction is coming off and on. The board is $450, but I found one cheaper. Question: Is there only one control board in the NUG5075BFB1 Heil unit? I don't want to...
1-15 of 15 Results
Top