DIY Home Improvement Forum banner
gasket
1-11 of 11 Results
  1. HVAC
    Are draft inducer gasket s made of asbestos? How about in 1990? Thanks
  2. General DIY Discussions
    I am hoping that someone can help me to find a fix for gasket on my Sears Kenmore compact freezer, Model 564.29701990. I purchased my freezer back in 1997, and Sears no longer carries the freezer, or gasket for this model. I have tried finding an OEM that would fix my issue, to no avail. The...
  3. HVAC
    I replaced the gasket rope on my Englander 17-vl for the first time this summer with Imperial 5/8" dia but it does not create a tight seal. I also noticed the rope isnt as rigid as the original Englander rope but's it's the 5/8" required dia. It's summer so I haven't lit the wood stove to cure...
  4. HVAC
    I tested a fiber glass rope gasket replacement on stove door and it seemed to fit tightly enough. However, now that I've glued it on to the door, it doesnt feel air tight. I can almost turn the door handle completely around so the new gasket seems less air tight than the one i replaced. How to...
  5. Plumbing
    So I’m replacing a bathroom faucet. Faucet went on no problem. The drain however, is not going so smoothly. The previous drain was the metal popup kind. The new one is a Pfister push & kind. Now, this drain comes with a rubber gasket that is supposed to sit in the sink bowl, under the flange...
  6. Plumbing
    The shower drips unless this valve is shut extra tight. I need to replace the washer, but need to first identify the brand. The home is in a remote location so need to show up with the correct washer -- or at least a kit of washers for that particular brand of valve. The home was built in...
  7. Plumbing
    Hi, I am hoping you can help me troubleshoot a problem I am having. :) The initial symptom was water leaking when the toilet was flushed: the water was leaking only when the toilet was actually being flushed, and a small amount of water would dribble from between the water tank and the body of...
  8. Plumbing
    I have a simple problem that evidently doesn't have a simple solution. The toilet tank was leaking in our guest bathroom so I decided to fix the problem myself by replacing the spud gasket, bolts, etc. One problem - the other toilets in our home are Kohler and I thought this one was as well...
  9. Plumbing
    I have a leak between a newly installed bathtub (Azzura, Adora: http://www.azzurabath.com/60_adora.html) and the overflow/drain assembly (http://www.rubinet.com/pdf/1758_install.pdf). The leak appears to be between the bottom of the tub and the waste elbow gasket. The waste elbow seat is...
  10. Plumbing
    :eek:HI, I recently paid a plumber @450 to install a kholer archer tub (60"x32") in an alcove. he had to move the old drain from 13 to 16" from the back wall and out about 9" from the right wall. There is a cutout from the substrate that was "plugged with gypsum board under the pipe (I am...
  11. Plumbing
    I bought a universal tank repair kit and replaced all the innards of my toilet tank. The new rubber gasket between the tank and bowl is about 1/2 inch thicker than the previous gasket I removed. This is causing the tank to wobble and is a noticeable 1/2 or so from the bowl. If I tired to...
1-11 of 11 Results
Top