DIY Home Improvement Forum banner

furnace blower

  1. HVAC
    I have an older Williams wall furnace in the middle of my living room where the intake air blower is at the top at roughly eye level behind a 14"x18" grill. The fan was just replaced this year and is in perfect working order, but it's just annoyingly loud when it's running, which is a fair...
  2. General DIY Discussions
    I have an older Lennox G20 WhisperHeat gas furnace that is in good working condition. I would like to use the blower without the heat to move air around the house. I currently have three wires running to the thermostat but only the Red and White are connected for the heat. I was wondering if...
  3. HVAC
    I have a Carrier Weathermaker 9200 series furnace. When starting the blower comes on for few seconds, then turns off for a few seconds and then back for a few seconds.....It does this about 6 to 8 times as if it's reaching a fast enough speed to stay on. Once it's up to full speed it runs...
  4. HVAC
    Hello Everyone, I am new to the forum and was wondering if you can help me diagnose a blower fan problem. My blower fan doesn't get started on its own quite a lot of time and makes a humming noise. If I manually spin the fan blades before switching the fan on then it starts fine. What do you...
  5. HVAC
    A week ago I woke up to an intermittent loud buzzing sound coming from my basement (2 seconds on/off). When I went down I could see that the blower fan wasn't turning and there was a burning smell. Did some research and replaced the run capacitor, then turned it back on. The blower came right...
  6. HVAC
    The blower on my American Standard furnace started to squeak. I does it for 1-2 minutes every 30 or so minutes. I tried to open it up and pull the motor to clean it and maybe oil it but I can't seem to find an easy way to open any panel. Does anyone has any idea on how to do it without taking...
  7. HVAC
    Looking for a Replacement Blower Motor - FASCO D150 - Want another brand replacement , so cross reference to other Brand / Model
  8. HVAC
    Hi (again). I have a furnace in the middle of a small (835sf) condo. There is only about 9" between the return vent and the blower motor. This creates a giant sucking sound that reverberates through the entire living space. An HVAC contractor has suggested using an "open return" -- removing the...
  9. HVAC
    Trane XE 78 furnace coupled with Trane 1000 stopped working all together after running the AC one time. Everything worked overnight but stopped by the next morning. Wife heard a noise come from the AC unit (she says) that night. The furnace has the LED indicator that has no flash. No blower fan...
  10. HVAC
    I have a 6-7 year old Fedders gas furnace / AC model ABA 060 NH3R. Yesterday, what I suspect is the fan/blower stopped working. Trying to troubleshot the exact problem I found that the breaker to the unit had been tripped. When I switched the breaker back on it trip again intermittently, some...
  11. HVAC
    i just installed a yorkoil furnace in my house. when i went to fire it up last night everything went beautiful except the blower motor.it first overloaded and shut it off then i freed it up but then it made alot of racket. i messed with it for a while and now i am to the point where it is good...
  12. HVAC
    I am having a problem with my HVAC system as described below: The thermostat (White Rogers) has two settings for the fan (auto and on). Right now, the fan it is set to auto. It has another switch with three settings (i.e. cool, off, heat) and it is set to off. The fan still comes on for a...
  13. HVAC
    Hello there I looked though posts to see if I could find this information if its there rather than ask a question that’s been answered in the past. I couldn’t find anything so I’ll ask now. I would like to get my furnace blower working without the heat. I’m sure the reason it’s not...
Top