DIY Home Improvement Forum banner

fan control

  1. Appliances
    Hello, I am trying to get home automation to work with my fan but need to know what my 'radio frequency' is so I can add it to my hub. I have a Minka-Aire Concept II fan and the 4 switches on the remote are up, up, down, down on one fan and also up,down,down,up on the other fan. Any possible...
  2. HVAC
    I just replaced my condenser fan motor because the bearings were shot in my old one. My unit is a Keeprite KSSD 19-36, probably around 25 years old. The old motor had 4 wires, red, black, brown and white. The new motor's wires are yellow, black, brown, and brown/white. After I installed the...
  3. Electrical
    I have a Reebok RL 900 Elliptical. Everything on the machine works fine except the fan. When the machine is plugged in (no power switch), the console fires up along with the fan (double fans, side by side at the top of the console). There is a button at the top center of the fans that is...
  4. HVAC
    Question: How can I wire my fan ON/OFF to be controlled by the thermostat heat call instead of using an aquastat or fan-limit switch? Background info: I have a hydro-air system with an aquastat controlling the fan for heating, thermostat controlling the fan for cooling. Problem has been that...
  5. Electrical
    Hi - I am replacing my Casablanca rotary wall switches (4 speeds) for my Casablanca ceiling fans (with pull chain). I have ordered several Lutron 1.5 Amp toggle switches with 3 speed slider to replace throughout the house. My issue is: in one room, there are 2 ceiling fans controlled by a...
Top