DIY Home Improvement Forum banner
erv
1-6 of 6 Results
  1. HVAC
    Can anyone tell me a formula you use for estimating the necessary blower cfm for an energy recovery ventilator (ERV) for house that is not built yet. What I want to know - How do I plan/size an ERV during planning stages of construction, prior to having a blower door test? Using some...
  2. HVAC
    https://drive.google.com/open?id=0ByR60SLJWxzzQVFmT1Bsc3d3VHg5UWdWRExHNlRCTWd5Y1Jj If I understand it correctly the manual says only two wires should be connected to the posts of the speed you want and no others connected. Five of the six posts have wires connected. what would be the correct...
  3. HVAC
    I am in the process of installing a 200 CFM ERV system in the basement and am trying to place the Exhaust and Fresh air vents to the outside. The issue is the siding goes almost all the way to the ground and the joists are 2x10's, so whatever vent I place will not give me enough ground...
  4. HVAC
    I'm looking for some advice with the following situation. I have a recently remodeled house with a full basement and a second story. I live in the upper mid-west with extremely cold temperatures. Last winter we had excessive moisture due to how tight our home is after the remodel. I installed...
  5. HVAC
    Hi Everyone, I've got a VanEE ERV (this one http://www.vanee.ca/fr/systemes-ventilation-residentiels/produit/33-erv-90h-v-ecm.html) that I had installed by some local guys. They did a few other things at the same time, and of the three jobs they had, I could clearly detect that two were...
    erv
  6. HVAC
    Hi Everyone, First, thanks for taking the time to read. Hopeful there's a genius here that can solve this; this forum has always been a big help. Just recently purchased a VanEE ERV 90H-V ECM and the platinum wall module to go with it. I programmed it to be off at nights, and doing some...
1-6 of 6 Results
Top