DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. Concrete, Stone & Masonry
    Hello! We've recently purchased a 60in diameter round dark marble table. The stone looks fine, but there is a ~1/16 in. coating on the table that is scuffed and cracked pretty severely in a couple of places. I've seen a lot of videos, etc. online that cover refinishing, but i'm looking for help...
  2. Painting
    I am a fairly handy guy. I am looking to put down an epoxy flooring in my basement. My house is about 60 years old. I had the bright idea to put down concrete resurfacer prior to painting the epoxy flooring. However, half way through resurfacing the basement I was second guessing...
  3. Concrete, Stone & Masonry
    Today I am grinding the concrete floor in our basement. The grinder has a vacuum attachment for the dust. I still expect there to be a fair amount of dust left after the job. Before I put down an epoxy coat, I need to get up as much dust and debris as possible. Some cleaning options I've come...
  4. Painting
    Have epoxy countertop I am doing over as it yellowed. I am going black. I have white epoxy undercoat. Can I use black resin dye to change the undercoat to black?
  5. General DIY Discussions
    Hello all, long time lurker first time poster. I am building a mahogany table that will sit beside a charcoal grill. I have built a mahogany bar in my basement and used a 2-part epoxy resin to coat it and it is absolutely perfect. When I started this grill table I was thinking I would use...
  6. Concrete, Stone & Masonry
    I painted my garage floor with Rust-Oleum EpoxyShield Garage Floor Coating in the summer of 2010. The floor was 20 to 25 years old by then and it was still bare concrete. I live in Wisconsin so the floor had been exposed to salt and melting snow as well as auto fluids. It was pitted in some...
  7. Painting
    Hello guys! I want to make a rotary spray painting mechanism based on an airbrush concept, for internal coating in pipes. I want to use CO2 cartridges or propellant cans as air source. As option also I consider to use a CO2 tank and a solenoid valve + regulator. I want o use Scotchkote Epoxy...
1-7 of 8 Results
Top