Search Results for ‘drip edge’

Hey everyone how would you go about swapping out the wood Trim under the drip edge hardy plank. Between basement walls and hardy plank. And is that drip edge built into the hardy plank? Zoom in to look at drip edge im talking about? What is the best way to tackle this. Any tips are more than...

I have an older garrison colonial with wood siding. It's getting painted right now but turns out we have a wooden drip edge (not smart) and it's soft in a few places. So various people here (painter and handymen) were putting their heads together to figure out what to do b/c wood doesn’t make...

I have an old Tin roof on my house that had a pretty serious leak on the one edge that has caused floor damage on the balcony below as well as foundation damage where it leaked down the siding and saturated the concrete. As a temporary fix I put flex tape on the damaged section as well as...

Here are a few pictures of my roof line showing the drip edging below the shingles. About halfway down the roof line the metal drip edge is bent outward. Any suggestions on how to easily and safely flatten it? Thanks.

Hello and thank you in advance for any help you can offer me here! BACKGROUND: I bought a new home in Ankeny, Iowa last spring in a new development with a HOA. The home was a spec home, however, I went under contract when it was being framed so I was able to customize it somewhat and choose...

Hi Everyone, If someone has a moment, I could use some advice. I'm shingling a shed roof. The length of the structure is approximately just under 9' with over-hang and drip edge. I'm on the 7th row and I'm using full shingles but the drip edge and/or overhang might not be completely flush...

I have a concrete Spanish tile roof with no drip edge. There is metal on the edge of the roof that the tiles rest on but do metal coming down over the fascia. It would be ideal if the rain came down only on top of the tiles, but in several areas it is coming down under the tiles. Should tile...

Good evening everyone, I recently had a local contractor come and replace my gutters and downspouts and I had a few questions about pictures I took after climbing on the roof. First, I had to call them back 3 separate times because they bent up one of the drip edges. The second time I called...

Styles of drip edge, F, D, T, L, G, H, A, all to confusing as are comparing terms roof edge, gutter apron, eave drip, drip edge. I have a low slope roof. I will be installing a wrapped fascia board and a gutter. Current roof has felt, starter course, shingles. Old drip edge was a simple L...

Folks, I'm a novice DIY'er replacing the roof on my shed and want to match the house. From what I've read most articles say to install drip edge on all all four edges, but my house does not have any flashing on the gable ends due to the fascia having molding at the top. Is there another...

on the front side of my shed, where the door is, i left the ridge beam protruding/overanging a foot relative to the wall because i want to have some overhang for the floodlight as well as be able to install a hook at the beam for skinning deer and such. however, i do not want the fascia to...

We're having to repaint some weathered fascia. I've bought the sander and am ready to paint, but my dad said that unless we get a drip edge installed here, it will just happen again. But everything I see online about installing drip edges seem to be geared toward shingle roofs. Looking at the...

I just had a new roof installed. When the roofer nailed the shingle at the drip edge on the rake end, he missed driving the nail into plywood and drove it into the overhang of the drip edge. After he pulled the nail, you could see the hole in the drip edge from the ground. Is this going to be a...

I am having a new roof installed(09/23/09) with a ridge vent. I was origionally told that I needed soffit vents for the correct ventilation but I have no soffits. They were to install drip edge vents somehow behind the gutter. It is a gable style roof. Now they are saying that vertical gable...