DIY Home Improvement Forum banner

cycle

  1. Appliances
    All, would appreciate any help I can get with my GE Profile Model PDT 825 SGJ0B. Usually run a load per day in the washer and have been doing so for over a year ++ with no real issues. Try to start a load this morning and when I close the door, the amber light on the front goes solid, usually...
  2. Appliances
    Model #MVWC200XW3 MAYTAG It is filling water correctly. The cycles are all messed up though. It just keeps agitating, spinning. Rinse and spin and drain and spin are no longer that, instead it fills with water and washes.
  3. HVAC
    I have a heat pump that I am having a significant issue with. When it is very hot outside (~85 Deg F or above), the unit runs fine and cools well. However, when it cools off slightly, the A/C will not run even though the stat is still calling for cooling. What happens when it is cooler is...
  4. Appliances
    Our washer is only 3 years old. Someone in my family "overloaded" our washer. During the spin cycle the washer was jumping around. As soon as possible, I opened the door to make it stop. Since then, the washer stops inbetween some cycles, and sometimes a cycle may run forever. The affected...
  5. HVAC
    I have an old Carrier 58GSC that seems to be cycling too often. The sequence is something like the following: 1. Heat is called for by the stat. 2. Igniter fires and lights the pilot. 3. Pilot burns for approx. 1 min. 4. Main burner fires up and burns for another 1 min. 5. Blower comes on, with...
Top