DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Plumbing
    Dears, Please see attached photos. I broke the plastic screw that I need. It was not suck the salt to work. I was not use it more than 10 years. I started to use it, it was worked but there were no soft water. I check the filter and salt water pipe, there is no problem on it. I remove all...
  2. General DIY Discussions
    Hello, 2 years ago the seals were replaced in our estate 2 water softener. Just noticed a leak from the bottom of the main tank and have shut the bypass valve. Any feedback on whether I should get this repaired or replaced? The unit must be around 13 years old. Thank you.
  3. Appliances
    Need info on the correct method to remove the "twin 3/4 hole head unit" and remove old media and replace with correct media. My good source of parts sent me 1.5 C.U. of fine mesh resin (which I asked for) and a tube (about 3/4-inch diameter with a fine hole filter at the lower end). The order...
  4. Plumbing
    We just moved to a new home (24 years old) just in the outskirts of town... The house is on a well and has terrible sulfur... The previous owners had culligan install a chlorination system as such Well water comes in, bleach is injected via powered pump (pump has a rotary adjustment 0 -...
1-4 of 4 Results