DIY Home Improvement Forum banner

craftsman

  1. General DIY Discussions
    I have a Craftsman 150 PSI Compressor (Model: 919.167310). I just purchased a new Air Regulator to replace the original one that I thought had gone bad since it would drain the main tank pressure to whatever I set the Regulator pressure to. However, when I replaced the old reg with the new reg...
  2. Tools
    I have a Craftsman 150 PSI Compressor (Model: 919.167310). I just purchased a new Air Regulator to replace the original one that I thought had gone bad since it would drain the main tank pressure to whatever I set the Regulator pressure to. However, when I replaced the old reg with the new reg...
  3. Tools
    I have a Craftsman 150 PSI Compressor (Model: 919.167310). I just purchased a new Air Regulator to replace the original one that I thought had gone bad since it would drain the main tank pressure to whatever I set the Regulator pressure to. However, when I replaced the old reg with the new reg...
  4. Tools
    Hi all. The muffler on my craftsman weedwacker is quite loose and making the weedwacker run quite loud. It's also leaking oil. I'm trying to remove the muffler in order to repair it, but can figure out how to get it off to save my life. Does anyone have any ideas? The model number is...
  5. Interior Decorating
    Looking for help picking a backsplash, it's something we have put off for two years now and it's time to get it done. I believe I've successfully attached some photos of the cabinets, countertops, and floors. The two surrounding rooms are a greenish/grey on the walls and the other is a greige...
  6. Building & Construction
    I've got a new project for the new year: restoring an old Victorian home in Southern California. First thing on the list is addressing the foundation, or lack of one. The home is in great shape for its age but the foundation consists of some rock pony walls and simple pier and beam. The lot is...
  7. General DIY Discussions
    I have a craftsman 1/2 hp. The problem is it will close and it keeps running until it hits the end and then reverses and goes til it hit the other end by the motor - the limiting adjustments do no good. Is it the logic board? Please help
  8. Appliances
    Well, after posting my questions and getting the fix from this forum several months back, my garage door has had another.....setback. This time, it looks like the sprocket (on the top of the opener unit) that turns the chain that pulls the door up - has broken off of the unit. It looks like...
  9. Appliances
    The garage door opener was here when I moved in. I know nothing about the age of it, though I am sure it has seen better days. It's a Sears Crafstman Plus 1/3hp. Model# 139.53609 This morning I left to go to work. Opened the garage door, and it went up fine. I backed out and hit the button...
  10. Remodeling
    I bought a house in Everett WA which was built in 1910. Where should I be worried about finding asbestos? The only obvious remodel that's been done is the kitchen has a drop ceiling with flourescent lighting, and the kitchen and dining room floor have been covered in linoleum looking material...
  11. Building & Construction
    In the process of purchasing a 1922 Bungalow and need help with the bathroom. Its our first home, it only has 1 bathroom. The bathroom has two large windows, one over toilet and the other creeping into the shower stall. I want to remove the pathetic choices of tile. The main concern is the...
  12. Remodeling
    This may be a really stupid question (but as you can see, my name is TOTALN00B for a reason!). I'm looking at some early Craftsmans in my area that were victims of 1980s decorating, and unfortunately they have all had EVERYTHING inside of them painted in a gazillion layers of the same shade of...
  13. General DIY Discussions
    I recently replaced my snowblower Auger belt then decided to kill two birds with one stone so I replaced the drive belt too. There is an awful lot of slack in the drive belt and I cannot figure out how to tighten it! I have a craftsman 24" 5.0 model number 247.886640. Someone help! :furious...
  14. General DIY Discussions
    This is a shot of the front of the house... and here is the layout... (Please let me know if some other info/images would be helpful) The mudroom is very clearly an addition, the kitchen really seems like an addition. Does this make sense? DH insists the bathroom wasn't always there...
  15. New Member Introductions
    hi, me and my husband are in the process of purchasing this house... its a 1915 bungalow.. full unfinished basement, low unfinished attic. 2 bedrooms, incredibly small bathroom, confusing kitchen. naturally, we plan to do lots of work. and i look forward to having somewhere to turn for...
  16. Landscaping & Lawn Care
    Hi There, I am trying to decide between two riding mowers, contestants are as follows: 1) Ariens A20BH42 http://www.homedepot.com/h_d1/N-5yc1vZ1xh3/R-202018736/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 2) Crafstman YT3000...
Top