DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Electrical
    I’m planning to use Tunable White LED strip lights for under cabinet kitchen lighting, with a compatible controller to set the color temperature of the LED strips. While the controller would typically be used to set both the color temperature and the brightness, what I’m contemplating is to use...
  2. Plumbing
    If anyone out there has a noritz hot water heater I have an extra controller rc-7651M. I don't even want $$ for it, just give me $20 to cover shipping. I tried selling it on facebook marketplace but it's such a specialized item I haven't even got a bite on it. I bought it because the original...
  3. Electrical
    I have 3 Hampton Bay ceiling fans, all different models, all in different rooms, all on different power circuits. Last night all 3 stopped responding to their respective controllers. Changed all batteries, flipped switches to change which controller ran which fan, powered on/ off. No...
  4. HVAC
    We are buying a house and we are at the stage where the house needs to be appraised by our bank. Everything is on and running except the furnace won't light, we have trouble shot it and the only problem we can come up with is the controller being bad. The furnace is we believe a 1970s Amana, it...
  5. Landscaping & Lawn Care
    For anyone who has experience with the SkyDrop Timer, Pump Start Relays, and/or connecting digital sprinkler timers to pump start relays.... I will connect the SkyDrop outdoors. I will need to use a Pump Start Relay. The Pump Start Relay will have two 24v wires out to the SkyDrop BUT there is...
  6. Landscaping & Lawn Care
    I am going to purchase some 18 gauge wire for my sprinkler system. I will have 10 zones with 3 different valve boxes. Do I need to selecting a multi-strand wire for the total valves ( 10+ 1 common wire) or can I select a strand number for the number of valves that will be at one location...
  7. HVAC
    Hi Eveyone, I have an oil-fired furnace with an attached water tank . Yesterday without any reason the furnACE (BURNER) stopped running. I noticed that the circulator pump is working. I"m suspecting the L8148A (controller) but wanted to know how I can check to see if the controller is sending...
  8. HVAC
    I have a 1997 vintage Trane XE80, which would cycle on for heat, Gas burners will light but for only a second or two then go off. The unit has a White Rogers Model 50A50-471 controller, The controller is flashing error code 5: Flame Sensed with Gas Valve Off. After reviewing post on this...
  9. Electrical
    Upgrading my sprinkler system. The timer is originally located in a bedroom, valve control wired run through crawlspace to valves outside. This is how it was installed. I would like to put my new weatherproof timer outside on the fence post near the system, so I don't have to run into the...
  10. Electrical
    I just bought the MLC-4X unit, and information including installation instructions can be found at this location: http://www.randmsupply.com/images/link/MLC-4XInstructions.pdf This issue has been raised many times on the forum before, but there are always unique situations which make the...
  11. HVAC
    I have a Payne 376c Furnace that seems to have just stopped working. The inducer motor turns on and eventually the blower motor turns on but the HSI never heats up so of course the burners never light. Is there anything that this specifically indicates?? BTW, the furnace uses a 310305-201...
  12. Electrical
    Hello, I have an apartment building that I recently had someone do some electrical work on for me. He did fine and the stuff he did passed the electrical inspection with the city. He is nowhere to be found now. Here's the story: I wanted all the exterior lights to be on a photo cell so the...
1-12 of 12 Results
Top