DIY Home Improvement Forum banner
chain
1-5 of 5 Results
  1. Landscaping & Lawn Care
    Unfortunately have to run a chain link fence right next to a tree. There is a rise or hump at the same location. One option is to trench the case but that would weaken the tree. Could the bottom of the fence be trimmed to follow the contour? Thanks in advance for any suggestions....
  2. Building & Construction
    Unfortunately have to run a chain link fence right next to a tree. There is a rise or hump at the same location. One option is to trench the case but that would weaken the tree. Could the bottom of the fence be trimmed to follow the contour? Thanks in advance for any suggestions....
  3. Electrical
    Does this apply to pig tails when chaining receptacles? 54" (9x 6") seems like a lot of wire to get in the box.
  4. Electrical
    I'm adding a 20A breaker to my service panel and and wiring up a chain of outlets in my garage. I understand all receptacles need to be TR and the first receptacle in the chain needs to be GFCI. As for wiring, my understanding is that it's INCORRECT to connect the chain through the receptacle...
  5. Electrical
    In preparation for a basement finishing, I had my licensed electrician move my panel away from the service entrance. To meet code (distance from entrance to shutoff), he had to install a main shutoff outside, then run the cable to my 200 AMP relocated box (and which also has it's own main...
1-5 of 5 Results
Top