Search Results for ‘bosch’

Bosch laser level part numbers are confusing. Do I have the prefix part of their part numbers correctly described below? GPL - displays point (plumb bob) but no lines ("P" for point) GLL - displays lines but no (plumb bob) points ("L" for line) GCL - displays both lines and (plumb bob) points...

Our in wall microwave has been blowing fuses periodically, usually after heating something for more than 4 minutes or so. Prior to today, it was due to faulty door microswitches. They fail and fuse together, which would blow the main 20amp fuse. To fix, I'd change the failed microswitch out - a...

For a while now my Bosch SHE44C model dishwasher has emitted a very unpleasant odor after a day or so of unloading. Doing some research online it appears there are a two common techniques used in order to prevent dirty water backups and the associated unpleasant odors; using a “high loop” for...

So I'm getting a new Bosch 500 series dishwasher, model SHP65T55UC. It is supposed to come today. I already removed the old one. I was reading the installation manual, and it says that the holes in the cabinet for the water supply line, drain line, and power cord need to be within a 4 in. x 2.5...

Hi all, if you've ever had Bosch dishwasher that leaks, you know you're not alone. Mine is leaking but I can't seem to find any postings in the forum that match up to my situation. I've replaced the bottom door seal as well as the seal that meets up with the door sides and top when it's closed...

I'm new to this forum and there seems to be a ton of great information on this site. I'm a home DIY'er and looking at finishing some floor tile and need to punch holes on cement slab for other project. I have access to a buy a second hand bosch bulldog sds drill (neighbor upgraded and wants to...

Hi, Just moved into new apartment with bosch stackable units, how do I setup with only normal outlet available?

I want to purchase some cordless tools for general home owner use, starting with hammer drill, impact driver, and circular saw. I want good quality and value, and need to consider performance, durability, price, service, expandability, etc. I've read not-so-good things about DeWalt, but good...

I have three 7/8 Carbide/Tungsten hammer bits. Time to sharpen instead of buying a fourth.:laughing: Called a guy who says he has five years in sharpening bits. I am not artistic enough to do myself, the geometry of the tip is out of my range of sharpening. Are these possible to sharpen back to...