DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Carpentry
    To make a long story short, I put up all of the hardboard panels prior to determining the spacing of the vertical wainscoting so am left with a few exposed seams throughout the room. I realize I should have determined spacing and then cut the hardboard panels to ensure that the seams are...
  2. Insulation
    We are completely restoring a single story, 3bd/2ba house. We live at 2800ft in California (climate zone 2 or 3). The house has board and batten siding (either rough pine or cedar). The house is wrapped with some type of weather barrier, followed by the sheathing. Attached to the back of the...
  3. Carpentry
    I have decided to seek help...for how I should do the board and batten around these windows. Two of the photos you will see the near complete look I have through-out the house. Door and window casing is 3.5 inch, craftsman style. I just don't know what I should do for under these three...
  4. Building & Construction
    Greetings, I'm designing and building a small (16' X 14') cabin in western wisconsin. My intent is to sheath the walls with OSB and then side the cabin with LP Smartside Grooveless panels. I would then add LP Smartside Trim to simulate board and batten construction. A) What thickness OSB...
1-5 of 5 Results
Top