DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. HVAC
    Hoping someone can help me out here. My furnace will not ignite. When it cycles on, the igniter lights up, gas comes out and briefly ignites, but does not stay ignited. https://youtube.com/shorts/xlwbQffA0gE?feature=share
  2. HVAC
    Good Evening all. What are you opinions on both of these brands? I'm getting quotes of $6800 for a 100k btu /3ton system vs. about $5500 for the ICP brand. The Amana I was quoted is a 2-stage and the ICP is a single stage. What are your opinions on the 2 brands and is a 2-stage really worth...
  3. HVAC
    Just go my new Amana furnace (AMVC96060) and it seems to be working ok. Was wondering what the green LED on the bottom of the from panel indicates. On my furnace it blinks fast about 30 times, pauses a second, then blinks twice. This continues all the time. Also, the inducer motor is kind...
  4. HVAC
    I live in Central NJ & have a 2 BR Town House (40 yr old) that had a solid Carrier Condenser (R22) unit that lived it's life more than it should have & went out on me last week..... The Heat Pump is not as old (I think it is close to 10 yr old unit) & us working fine. I have gotten 5-6...
  5. HVAC
    My furnace has the red light blinking 3x, which indicates a stuck pressure switch. I read through some suggestions on how to fix this problem on forums like this and largely it seems blowing through the hose connecting the switch to the induction fan motor helped a lot of people. I tried this...
  6. HVAC
    Hey, guys. Got an Amana 3-ton variable speed split system installed for the upstairs of the house last week. Fired it up for the first time on Saturday night. With the fan set to "on", I get a nice slow air movement. But as soon as heat is called for, it's like a wind tunnel hits. The way I...
  7. HVAC
    Amana furnace model GHI90A30. - Gets call for heat, igniter heats, main burner lights, furnace heats up, blower motor comes on, does not overheat, runs for a couple of minutes then the main burner turns off. - Blower turns off after furnace cools enough, igniter heats, main burner lights...
  8. HVAC
    Amana model GUIC070FA30 The furnace is four or five years old, and we have had problems, last season, that seem to relate to the draft safety switch. When it has been particularly windy, the furnace will switch on, hum for awhile, and switch off. Then it will do this again. Last season it...
  9. HVAC
    I have an Amana AMH95 Furnace that was installed in January of 2009. I have had no issues with this furnace through the first two winters. This past week I tested it in anticipation of the coming heating season and it is not working. I turned the thermostat to Heat and set the temp well above...
  10. HVAC
    We have a big wall unit air conditioner (Model Number: PTC153D50ARDA Brand: Amana) that was freezing up, so we unplugged it, cleaned it out, and now it will not turn on. The light on the plug is green and we've tested/reset the plug several times and still nothing. Any advice?
  11. HVAC
    Thanks in advance for the assistance! I believe I shorted something out as I was changing over from a basic digital thermostat to a 7 day digital thermostat. As I was pulling the old mount off the elec. tape slipped off the blue (common) wire and sparked. I re-wrapped the line and continued...
  12. HVAC
    I have an Amana Furnace Model #GUIC070FA30 that was installed in 2004. For some reason it will occaisionally ignore the thermostat and stay off. I know it's not the thermostat because when I crossed the red and white wire, the furnace stayed off. I shut everything off and back on, then it works...
  13. HVAC
    I have 2 Amana Air Command Hi Efficiency 90 gas furnaces. They are both about 12 years old. One has had service three times in the last month and a half and the symptom is always the same….blowing cold air. First they replaced the thermostat? Next they replaced the igniter with an upgraded...
1-13 of 13 Results
Top