DIY Home Improvement Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General DIY Discussions
    Thanks in advance for your time. I'm wiring baseboard heaters in my house. Foreseeing that my panel is running out of spaces, and because it's a old house and it's difficult to run wires around, I wanted to pull as little wire as possible. It would also be very difficult to have one thermostat...
  2. Electrical
    I am interested in buying a medical device that says the max watt output is 5000 watts. As far as I know you can only run up to 20 amp tops at home. I do NOT have a 220 or 240 volt outlet. Everything is 120 volt. My questions are; I am pretty sure it is not going to work with my current setup...
  3. Electrical
    Hi folks. I am installing a 30amp Eaton DPF221RP fusible pullout a/c disconnect, but Im using it as an appliance disconnect instead. It did not come with any instructions about how to wire it. I have quite a bit of experience with wiring, so I'm feeling pretty stupid right now. Here's what I...
  4. Electrical
    So to this point I've read just about everything on 240v, 3 prong wiring and I'm still stuck. I bought a 240v, 4800w 20amp garage heater. I added the 30amp circuit (noted on the box as the required circuit), ran the 10/2 wire (it happens to be 10 CU 2, if that makes a difference, I was told it...
1-4 of 4 Results
Top