Hi, I am doing a remodel and I currently have two lights between two 3 way switches with the power coming in from one of the lights. See attached for the diagram. I am interested in eliminating one of the light switches. Can someone please explain how to cap off one of the switches and run...

Hours searching for info specific to this situation has been only a waste of time, time I have no more of... Please help! BOX 1 (SINGLE GANG) CONTAINS = SOURCE (IN) : 12/2-wire + GROUND FEEDER to FAN/LIGHT(OUT) : 12/2 + GROUND FEEDER to BOX 2 (OUT) : 3 WIRE + GROUND BOX 2 (DOUBLE GANG) CONTAINS...

Hello everyone, hoping I can find a solution to my electrical challenge. I have the following: 3 way switch with 3 locations and adding a dimmer. 3 Switches: 1st bottom of stairs (3 way switch) - 2nd front of hallway (new lutron skylark contour cl dimmer and 3rd back of the hallway (single...

Hi forum, my girl has a condo built in 1989, I am trying to help her install an occupancy and dimmer switch into the kitchen with florescent lighting. Lutron makes the switch and in the current switch on the wall we have a black and red (traveler?) wire going to the switch, all white wires are...

I recently replaced 2 old 3 way switches in my home with new 3-Way lighted ones. All connections appear to be the same. Lights turn ON/OFF properly, but while OFF, the light faintly blinks. I've tried 2 diff bulbs (CFL) with the same result. I also placed the old switch back on one and the...

I am trying to add a digital timer switch to a 3 way configuration. I got the switch to work with one issue, it only works it the 2nd switch in the circuit is in the on position. Please note that the other switch is a standard on off switch. If I turn the second switch off, I cannot turn the...

I currently have 2 3way switches contolling a light. power comes in to the first 3 way switch to light, to other switch. How do I add the single pole switch for the fan as it will not be needed to be shut off from 2 different locations in room.