DIY Home Improvement Forum banner
Cancel
Next project involves lighting for my FM shelves. First I cut out a half circle that matches the bottom of the shelves
Then used some paper to mark out the exact location of the indents the carousel horse bases fit into and traced them to the ply half circle
I used some acrylic paint on the bottom of the shelf to transfer the hole for the brass rod to the ply half circle
Like so...
Next project involves lighting for my FM shelves. First I cut out a half circle that matches the bottom of the shelves
As an aside, the garage floor was all wet while staining because of this huge snow we got on Dec. 16/17. Despite my husband blowing the drive before
Next was staining the radiator covers to match the kitchen cabinets (this is the fourth coat because I used a sponge application the 1st & 2nd ...
Here I have the radiator covers all glued / set up. The top peices were a bit long so I'll have to trim them down. Its hard to see, but there's a ...
Mystriss

Next project involves lighting for my FM shelves. First I cut out a half circle that matches the bottom of the shelves

Report
Watch Add bookmark
There are no comments to display.

Media information

Album
Dining Room to Carousel Horse Display Room
Added by
Mystriss
Date added
View count
24
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
samsung SM-N975U
Aperture
ƒ/1.5
Focal length
4.3 mm
Exposure time
1/40
ISO
500
Filename
20221209_084304.jpg
File size
4 MB
Date taken
Fri, 09 December 2022 8:43 AM
Dimensions
4032px x 1908px

Share this media

Top