DIY Home Improvement Forum banner
Cancel
Add bookmark
The wedge splits off a piece of oak, down to where a partial saw cut was made.

The wedge splits off a piece of oak, down to where a partial saw cut was made.

  • 0
  • 0
A dogwood wedge is inserted into the crack.

A dogwood wedge is inserted into the crack.

  • 0
  • 0
A mallet is made from a piece of oak. Here, a hatchet is used to start a split for the dogwood wedge.

A mallet is made from a piece of oak. Here, a hatchet is used to start a split for the dogwood wedge.

  • 0
  • 0
These are the finished wedges. Dogwood is easy to work with an axe when it is green, once it has dried, it is very difficult to work.

These are the finished wedges. Dogwood is easy to work with an axe when it is green, once it has dried, it is very difficult to work.

  • 0
  • 0
After sharpening both ends, the sections were cut in half.

After sharpening both ends, the sections were cut in half.

  • 0
  • 0
Dogwood wedges were made from a couple of small trees recently cut while clearing for a garden. I will use them to split logs into rough boards that c

Dogwood wedges were made from a couple of small trees recently cut while clearing for a garden. I will use them to split logs into rough boards that c

  • 0
  • 0
Doors

New project - tool box

I am planning on making a new tool box for my timber framing tools. It will may a while, I am going to try to use primitive tools and start with a tree we cut a few years ago.
Click to expand...
There are no comments to display.

Album information

Album owner
Doors
Date created
Item count
6
View count
57
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Doors

Doors

Media items
6
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top