DIY Home Improvement Forum banner
Cancel
Add bookmark
The interlock is mounted on the panel. Note the required labeling.

The interlock is mounted on the panel. Note the required labeling.

  • 0
  • 0
The Reliance PB30 generator inlet ready to have the cover mounted.

The Reliance PB30 generator inlet ready to have the cover mounted.

  • 0
  • 0
10/3 Romex cable protruding through the side of the house. The cable will enter the rear of the PB30 generator inlet. The cable is surrounded with D

10/3 Romex cable protruding through the side of the house. The cable will enter the rear of the PB30 generator inlet. The cable is surrounded with D

  • 0
  • 0
The Reliance PB30 with a 10/3 Romex cable entering through the rear. The cable is secured with a button type Romex connector.

The Reliance PB30 with a 10/3 Romex cable entering through the rear. The cable is secured with a button type Romex connector.

  • 0
  • 0
In this particular generator installation, the grounding conductor and the neutral conductor are connected on the same terminal bar. A portable gener

In this particular generator installation, the grounding conductor and the neutral conductor are connected on the same terminal bar. A portable gener

  • 0
  • 0
The finished interlock kit installation on a Cutler Hammer circuit breaker panel.

The finished interlock kit installation on a Cutler Hammer circuit breaker panel.

  • 0
  • 0
M

Generator Interlock Kit and Inlet Photos

Photos of an actual generator interlock kit installation on a Cutler Hammer circuit breaker panel. Also depicted is the Reliance PB30 generator inlet.

The full story can be seen here: https://mrelectrician.tv/ch-generator-interlock-kit/
Click to expand...
There are no comments to display.

Album information

Album owner
MrElectricianTV
Date created
Item count
6
View count
140
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

M

MrElectricianTV

Media items
34
Albums
3
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top