DIY Home Improvement Forum banner
Cancel
A dogwood wedge is inserted into the crack.
The wedge splits off a piece of oak, down to where a partial saw cut was made.
A dogwood wedge is inserted into the crack.
A mallet is made from a piece of oak. Here, a hatchet is used to start a split for the dogwood wedge.
These are the finished wedges. Dogwood is easy to work with an axe when it is green, once it has dried, it is very difficult to work.
After sharpening both ends, the sections were cut in half.
Dogwood wedges were made from a couple of small trees recently cut while clearing for a garden. I will use them to split logs into rough boards that c
Doors

A dogwood wedge is inserted into the crack.

Report
Watch Add bookmark
There are no comments to display.

Media information

Album
New project - tool box
Added by
Doors
Date added
View count
49
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top