DIY Chatroom Home Improvement Forum

DIY Chatroom Home Improvement Forum (https://www.diychatroom.com/)
-   Automotive Repairs (https://www.diychatroom.com/f46/)
-   -   One person camper shell for Chevy S10 pickup (https://www.diychatroom.com/f46/one-person-camper-shell-chevy-s10-pickup-658689/)

DoomsDave 05-08-2019 07:30 AM

One person camper shell for Chevy S10 pickup
 
I have a Chevy S10 pickup truck and I'd like to use it more to move plants and things like that, sometimes, and other times use it to haul dirt.

Tarping is NOT adequate for the plants, especially over long distances of 100+ miles.

I'd like a camper shell that's removable and installable by ONE person, who's not Superman (or -woman) like lil' old 60-ish me.

I guess I could do a bespoke ad hoc thingie, but maybe one of our beloved DIY Chatters might have some great thoughts in your hip pockets?

Thanks for looking! :vs_cool:

rjniles 05-08-2019 08:09 AM

Re: One person camper shell for Chevy S10 pickup
 
Canvas camper shell.

https://www.autoanything.com/hitch-b...RoCYYAQAvD_BwE

Sent from my RCT6213W22 using Tapatalk

Nealtw 05-08-2019 08:29 AM

Re: One person camper shell for Chevy S10 pickup
 
Do you have a garage?




This one would be better if he could drop it on the truck, all he had to do was turn it around.


BayouRunner 05-08-2019 08:43 AM

One person camper shell for Chevy S10 pickup
 
I have a lift mounted for my Jeep hard top. It works off a drill or hand crank. Takes a few minutes to take it on and off. I only take it off for the summer and I put it back on for hunting season. It works wellAnd is pretty easy


Sent from my iPhone using Tapatalk

DoomsDave 05-08-2019 09:50 AM

Re: One person camper shell for Chevy S10 pickup
 
Quote:

Originally Posted by Nealtw (Post 5829051)
Do you have a garage?


https://www.youtube.com/watch?v=NArysaJDrBo


This one would be better if he could drop it on the truck, all he had to do was turn it around.

https://www.youtube.com/watch?v=izftbpDHwZg

Do I have a garage??? :vs_laugh::vs_laugh::vs_laugh:

I have a garage, but the door's been removed, and it's now just a giant laundry room. Everything parks outside.

That's a really slick rig, though! Might motivate me to rig something in front of the garage. :vs_cool:

DoomsDave 05-08-2019 09:52 AM

Re: One person camper shell for Chevy S10 pickup
 
Quote:

Originally Posted by rjniles (Post 5829033)
Canvas camper shell.

https://www.autoanything.com/hitch-b...RoCYYAQAvD_BwE

Sent from my RCT6213W22 using Tapatalk

That is slicker'n cat poop on linoleum! A bit pricey, but it's a great thought! :vs_cool:

DoomsDave 05-08-2019 09:53 AM

Re: One person camper shell for Chevy S10 pickup
 
Quote:

Originally Posted by BayouRunner (Post 5829059)
I have a lift mounted for my Jeep hard top. It works off a drill or hand crank. Takes a few minutes to take it on and off. I only take it off for the summer and I put it back on for hunting season. It works wellAnd is pretty easy


Sent from my iPhone using Tapatalk

Got a picture?

Nealtw 05-08-2019 10:13 AM

Re: One person camper shell for Chevy S10 pickup
 
1 Attachment(s)
build a removable fishing rod:biggrin2:

HenryMac 05-08-2019 10:18 AM

Re: One person camper shell for Chevy S10 pickup
 
5 Attachment(s)
Hey Dave... those old school aluminum toppers are crazy light. But if the truck is really nice it still takes 2 people to load it to keep it from scratching up the paint on your truck.

When we finished our attached garage I built a hoist structure to remove the hardtop on our Jeep, and built a "caddy" to sit the top on and roll it into the corner. You could do something similar.

The post is a basement support column. It's removed when not in use. There is a hole in the ceiling for the pole to engage the end of the support beam.

Beam laying on the trusses is supported at both ends. The basement support column engages the loose end, and the column is screwed upward. This means no load on the trusses from the beam.

3onthetree 05-08-2019 10:34 AM

Re: One person camper shell for Chevy S10 pickup
 
Some ingenuity displayed by all. I'll just say make sure the topper has a sunroof to haul those palm trees you've been dealing with :biggrin2:

DoomsDave 05-08-2019 01:32 PM

Re: One person camper shell for Chevy S10 pickup
 
Quote:

Originally Posted by HenryMac (Post 5829151)
Hey Dave... those old school aluminum toppers are crazy light. But if the truck is really nice it still takes 2 people to load it to keep it from scratching up the paint on your truck.

When we finished our attached garage I built a hoist structure to remove the hardtop on our Jeep, and built a "caddy" to sit the top on and roll it into the corner. You could do something similar.

The post is a basement support column. It's removed when not in use. There is a hole in the ceiling for the pole to engage the end of the support beam.

Beam laying on the trusses is supported at both ends. The basement support column engages the loose end, and the column is screwed upward. This means no load on the trusses from the beam.

Your garage is nicer than much of my house!

As noted above, I don't really have a garage for all that rigging. But it might be worth putting up something outside.

BayouRunner 05-08-2019 04:59 PM

Re: One person camper shell for Chevy S10 pickup
 
Quote:

Originally Posted by DoomsDave (Post 5829115)
Got a picture?



Gonna take my top off this weekend. Iíll send one then


Sent from my iPhone using Tapatalk

BayouRunner 05-09-2019 12:00 AM

One person camper shell for Chevy S10 pickup
 
This is what I have. Except I strap the Jeep top to the bottom of the rack. Then crank it all the way to the ceiling. I just use a battery powered drill to crank it. I donít have any pictures with the top in the air but will post one when I take it off. I plan on it this weekend unless something changes. It was roughly about $250

https://uploads.tapatalk-cdn.com/201...7117944a9b.jpg

You can look at videos. I canít figure how to post a link. ďRacor lift Jeep top liftĒ on you tube is the shortest video that will give you the concept

HenryMac 05-09-2019 09:21 AM

Re: One person camper shell for Chevy S10 pickup
 
1 Attachment(s)
Quote:

Originally Posted by DoomsDave (Post 5829315)
Your garage is nicer than much of my house!

As noted above, I don't really have a garage for all that rigging. But it might be worth putting up something outside.

A big ole tree and a block-n-tackle would get the job done too!

Quote:

Originally Posted by BayouRunner (Post 5829451)
Gonna take my top off this weekend. I’ll send one then

:wink2:

BayouRunner 05-12-2019 11:41 AM

One person camper shell for Chevy S10 pickup
 
https://uploads.tapatalk-cdn.com/201...4be35022b4.jpghttps://uploads.tapatalk-cdn.com/201...491ef3ae27.jpghttps://uploads.tapatalk-cdn.com/201...18c63f4f97.jpg
Only takes maybe 10 minutes to get top off. Whole process by the time I gather the drill, bits and radio. Then remove the windows maybe 30 minutes

Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 11:25 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.