DIY Chatroom Home Improvement Forum - View Profile: csab_
Advertisement


Go Back   DIY Chatroom Home Improvement Forum > Members List


CLICK HERE AND JOIN OUR COMMUNITY TODAY...IT'S FREE!

csab_ csab_ is offline

Member

About Me

  • About csab_
    Location
    Louisville, KY

Statistics

Total Posts
Blog
Total Thanks
General Information
  • Last Activity: 04-20-2017 03:44 PM
  • Join Date: 08-16-2011
  • Referrals: 0

Mentions

No results to display...

Quotes

04-10-2017
10:17 PM - airtas quoted csab_ in post Re: light stopped working after a couple minutes and now black
If you had a switch loop, ...
02:09 PM - csab_ quoted jpisme in post Re: Exposed Run
What if it was 12-2 UF Wire...
01:53 PM - csab_ quoted agwood75 in post Re: Wiring Multiple 2-Way and 3-Way Light Switches on One Circuit
Also, I have a lot of extra 1...
01:51 PM - csab_ quoted agwood75 in post Re: Wiring Multiple 2-Way and 3-Way Light Switches on One Circuit
Wow, thanks for all of the he...
03-30-2017
08:13 PM - Hellochicken quoted csab_ in post Re: Celing light fail
You probably have 240 V be...
03-27-2017
12:16 PM - csab_ quoted Old Brian in post Re: How to use multimeter
60 - 120 milliamps (mA) is the...
03-20-2017
10:34 PM - csab_ quoted gary.bruzzese in post Re: Replace panel, but keep existing breakers?
Assuming the panel switch is being...
08:54 AM - csab_ quoted Jim Port in post Re: NEC rule on upsizing EGC
It is not up sized just for v...
03-19-2017
05:28 PM - J. V. quoted csab_ in post Re: terminating 3 gauge wire on ground bar
That's a fork lug, right? ...
04:45 PM - Fishbulb28 quoted csab_ in post Re: terminating 3 gauge wire on ground bar
Why is #1 aluminum or #3 c...
10:50 AM - Ripcord quoted csab_ in post Re: Backwards wiring instructions?
Thinking it further, it ha...
09:39 AM - csab_ quoted Oso954 in post Re: terminating 3 gauge wire on ground bar
You MAY need three. Did you...
03-17-2017
09:26 AM - csab_ quoted Brad1231 in post Re: Mystery switches...
has anyone ever figured out h...
03-16-2017
08:18 PM - csab_ quoted J. V. in post Re: terminating 3 gauge wire on ground bar
You can buy one of these a...
12:08 PM - csab_ quoted Richard Pryor in post Re: 600 ft run
How do I splice three #6 wires tog...
11:35 AM - Richard Pryor quoted csab_ in post Re: 600 ft run
OK, then you are fine for ...
11:26 AM - carloh quoted csab_ in post Re: What to do after short circuit created power spikes
So worst case scenario it ...
11:25 AM - csab_ quoted Richard Pryor in post Re: 600 ft run
It's either 3/4 or 1" Im not sure....
11:17 AM - csab_ quoted Richard Pryor in post Re: 600 ft run
I used a snake thing while the gro...
11:08 AM - csab_ quoted Richard Pryor in post Re: 600 ft run
How do I pull new wires? The condu...



Top of Page | View New Posts

 

Search Engine Friendly URLs by vBSEO 3.6.1