Deep shower niche, retrofit
I want to put a niche in a wall that has a lot of space behind it - at least 8". But they want a niche that is about 5" deep. The wall is already up and I'm going to be cutting the niche into the wall when I get the tile up to that point. (The wall is already up and covered with Kerdi.)
Normally this isn't hard, because you build a 3 1/2" deep niche using the wall behind in the stud bay. But in this case, I have to put in the back wall of the niche myself. So, suggestions for putting the studs in there for the niche, and then also attaching a back wall to those studs as the niche back?
|All times are GMT -5. The time now is 08:55 PM.|
Copyright © 2003-2014 Escalate Media LP. All Rights Reserved