DIY Chatroom Home Improvement Forum

DIY Chatroom Home Improvement Forum (
-   Plumbing (
-   -   Water Heater at end of cold trunk? (

Pittsville 05-22-2011 03:10 PM

Water Heater at end of cold trunk?
Running 3/4" CPVC trunk for cold water. I'm connected to the line coming from the water meter and then I used 3/4" x 3/4" x 1/2" tees to each of my fixtures (shower, toilet, two faucets in vanity). After the fixtures, I turn down 90 degrees to my water heater. Are there any issues with this configuration as opposed to tee'ing off the 3/4" main and running individual 3/4" trunks for the water heater/fixtures? In other words, will it matter that the water heater is being supplied last in line instead of first? Will I have low hot water pressure if I'm running the cold water on say.. a vanity faucet or the toilet tank is filling?

Pittsville 05-24-2011 07:04 PM

Any ideas?

TheEplumber 05-24-2011 07:20 PM

You'll should be OK if 3/4 is the proper size for your service

All times are GMT -5. The time now is 04:58 PM.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.