Hello people, im evan and i have a problem with my water fall pump. i read another post about the same thing, except the capaciter was for a water presure pump. I have a capaciter that is a bit different. when i turn the motor on i hear a buzzing noise and the motor doesnt turn. i donk know if it is the motor or the litle white plastic thing that is made by inco. i dont really know alot about this stuff so please if any one could send me a link to a capacitor like the one that i need, that would be great. here are the specifications:
at the top it sais sintex 25 .D2 .20
+ or minus 5%b
ac250v b 25/85/21
ac 330v c 25/85/21
then at the bottom it sais 50/60 Hz
and EN 60252-1
Please help me with the pump. if not it will cost me $300. i dont know if you need this but my email is email@example.com
Does it look like this:
If so, you can order one from somewhere I'd assume rather easily.
Might try: http://www.mouser.com/EPCOS/Passive-...z0wqrdZ1z0x6fr
A picture might help.
No it doesn't look like that. I will try to get a pic soon but i need to do my school work.(homework)
Have you checked the impeller to make sure no debris is stuck in it, and that it turns freely?
Yes i did ches the impeler, is that how you spell it? impeler?
Well ya i had to remove the impeler to get to the motor.
|All times are GMT -5. The time now is 12:01 PM.|
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.