design tall shower front to vent
hi,, trying to design the front of a 6 foot wide shower front ( 4 1/2ft deep). Ceiling slants on one side fron 11 feet high to 9'8'' on the other side. Want to to bring the front side down- like a header/bulkhead 1 foot, so including the trianglular area, would be more like dropping front about 31 inches on the south end and 12 inches on the north side . Plan to install glass door,partial glass panel and tiles in front up to a 6 1/2 foot tall range. Theres 2 shower heads, one on each end of shower, has glass block window. Theres a fan vent 1 foot from the shower front and will have a ceiling fan in the room also. Want to knnow if I will have problems with top part of shower drying. Don't want to have mold problem. Plan to probably tile the shower all the way up and include ceiling, instead of just going to the 8 foot level as the room ceiling ends at the 8 ft height. Hope this is clear? Will I need extra open area? will the interior space at the top of the shower dry? Doing now and help is needed. Thanks,,
how to do shower front-
H,,, do I need to post an image of this to figure it out?
|All times are GMT -5. The time now is 01:39 PM.|
Copyright © 2003-2014 Escalate Media LP. All Rights Reserved